V5 3.0 インチ HD ドロップイン オールインワン レトロ ピクセル 720x480
V5 3インチ 3.0 インチ HD ドロップイン オールイン 1 ラミネート加工 720*480 レトロ ピクセル IPS ディスプレイ GBA SP コンソール バックライト用。明るさ制御のためのはんだ付けはオプションです。これは、ヒンジなしの金属製シェルまたは従来の金属製のヒンジ付きシェルの両方に適合します。銅テープのタッチ センサーを LCD に向かって上に移動します。
- 15段階の明るさレベル
- OEMと同じディスプレイサイズ
- ピクセル効果：ノーマル、レトロピクセル、スキャンライン1、スキャンライン2
- 8つのカラーモード
- タッチスクリーンで明るさとカラーモードを変更
- オンスクリーンディスプレイ (OSD) では、任天堂 PCB のフレックスから Q128 まで 1 本のワイヤをはんだ付けする必要があります
メニュー操作 (ワイヤがはんだ付けされている場合):
明るさを変更するには、「明るさ」ボタンを短く押します。
「明るさ」ボタンを 5 秒間押して、OSD メニューをアクティブにします。
OSD メニューがアクティブになっているときにボタンを長押しして調整項目を選択します。
OSD メニューがアクティブになっているときにボタンを短く押して項目を調整します。
ノート：
1. ハウジングに組み立てる前に、スクリーンとフレックス ケーブルをテストする必要があります。部品取付後の返品はお受けできません。ニンテンドー ボードに接続し、純正バッテリーを所定の位置に保持してテストするだけです。
閲覧するには 当社のすべての USP 製品
Notes
These parts are not mass produced and we use multiple machine shops, so surface finish, texture, and color may vary between batches. Colors may also look different depending on your screen, the lighting, and variations in anodizing.
Please be sure to review our refund policy for cancelled and returned orders.
We cannot change the value of the shipment and sadly we do not have control over your particular country's fee/tariffs/taxes.
Brass parts come as machined and may show oxidation/discolor (due to being exposed to air) and some small machining or small scratches may be present. Assume you will need to do your final surface finishing using a flexible 3M sanding pad. (The 3M 7448 usually works well). After polishing, clean and apply clearcoat, poly, or other coating to maintain the shine. Note Brass is also very dense (heavy) and conductive. Consider in some applications, these attributes may have adverse effects. (ex. The SP hinges will not support the screen as well). If used with electronics, it is advisable to use kapton tape, insulating paint, (nail polish may work) to prevent electrical shorts.
Resources
Out of stock? Signup for our out of stock notification on this product page and check our product availability page
Assembly Instructions
International Customers
We are located in the USA, and want everyone in the world to experience Boxy Pixel products worldwide! It is important to understand a few points:
1. There are two shipping methods available. DHL and USPS (United States Postal Service). DHL is very fast and comes with insurance, but can be expensive. The USPS slow shipping we offer can take many weeks, is not reliable, and is not insured.
2. If you do choose uninsured USPS for your international shipping, we do offer third party insurance to help in case it gets lost. This is "route" insurance. It is not expensive, and is worth the cost. Deselecting this option at checkout will waive all insurance. If your package is lost, we unfortunately cannot send a refund or replacement.
3. If an item gets shipped back to us due to delivery problems, we would need to charge additional fees if you would like to attempt delivery again.
4. Return shipping is the responsibility of the buyer
5. We are prohibited from shipping batteries outside of the USA.
These parts are not mass produced and we use multiple machine shops, so surface finish, texture, and color may vary between batches. Colors may also look different depending on your screen, the lighting, and variations in anodizing.
Please be sure to review our refund policy for cancelled and returned orders.
We cannot change the value of the shipment and sadly we do not have control over your particular country's fee/tariffs/taxes.
Brass parts come as machined and may show oxidation/discolor (due to being exposed to air) and some small machining or small scratches may be present. Assume you will need to do your final surface finishing using a flexible 3M sanding pad. (The 3M 7448 usually works well). After polishing, clean and apply clearcoat, poly, or other coating to maintain the shine. Note Brass is also very dense (heavy) and conductive. Consider in some applications, these attributes may have adverse effects. (ex. The SP hinges will not support the screen as well). If used with electronics, it is advisable to use kapton tape, insulating paint, (nail polish may work) to prevent electrical shorts.
Out of stock? Signup for our out of stock notification on this product page and check our product availability page
Assembly Instructions
We are located in the USA, and want everyone in the world to experience Boxy Pixel products worldwide! It is important to understand a few points:
1. There are two shipping methods available. DHL and USPS (United States Postal Service). DHL is very fast and comes with insurance, but can be expensive. The USPS slow shipping we offer can take many weeks, is not reliable, and is not insured.
2. If you do choose uninsured USPS for your international shipping, we do offer third party insurance to help in case it gets lost. This is "route" insurance. It is not expensive, and is worth the cost. Deselecting this option at checkout will waive all insurance. If your package is lost, we unfortunately cannot send a refund or replacement.
3. If an item gets shipped back to us due to delivery problems, we would need to charge additional fees if you would like to attempt delivery again.
4. Return shipping is the responsibility of the buyer
5. We are prohibited from shipping batteries outside of the USA.
Give your Classic electronics a new life!
Unique
Parts cut from a solid block of billet aluminum
Protection
Each part is anodized for long lasting protection