CNC機械加工された金属ゲームボーイカートリッジ
これらの機械加工されたアルミニウム ゲーム カート ハウジングは、プラスチック製のストック ゲーム カートをスタイリッシュに置き換えるように設計されています。カートリッジの表面は CNC 加工されています。
フロントとリアの両方のハウジングとファスナーが含まれます。純正ゲームの PCB 内部に完璧にフィットします。アルミニウムのシェルは傷を防ぐために透明またはカラー陽極酸化処理されています。
真鍮カートは非常に柔らかい素材の未加工の真鍮であり、導電性があります。これにより、必要に応じて研磨する機会が得られます。柔らかい素材のため、真鍮の素地に微細な傷がある場合がございます。
これは、everdrive、ez flash、またはその他のフラッシュ カートには適合しません。
を参照してください。さらに質問がある場合は、 FAQ ページをご覧ください。
ライトブルーは限定生産、セレコートコーティングのプロトタイプです。よく見ると多少の塗装ムラがあるため、定価より安く販売しております。このブルーは写真では伝わらない輝きがあります。
ノート
- これらはほとんどのゲーム カート電子機器に適合しますが、場合によってはカートを少しヤスリで削る必要がある場合があります。例としては、バッテリーのはんだ接合部が斜めになっているゲーム カートがあります。
- 金属製のゲームボーイ筐体にこれらの金属部品を使用する場合は、常識の範囲内で使用してください。金属（シェル）上で金属（カート）を滑らせると摩擦が大きくなり、傷が付く可能性があります。
- ファスナーは非常に小さいので締めすぎにご注意ください。
- これらの部品は大量生産されておらず、複数の機械工場を使用しているため、表面仕上げ、質感、色がバッチごとに異なる場合があります。また、お使いの画面や照明、アルマイトの変化により色が異なって見える場合があります。
- これらの変動や部品の潜在的な損傷により、在庫は若干ずれる可能性があります。調整は行っておりますが、これを予測することは難しく、どのアイテムでも予想よりも少ない場合があります。
- 注文のキャンセルおよび返品に関する返金ポリシーを必ずご確認ください。
- 海外からの注文、輸入手数料、関税に関する情報については、よくある質問ページをご覧ください。出荷金額は変更しません。
- 真鍮は機械加工されたままの状態で出荷されるため、多少の酸化/変色が見られる場合があります。この問題を解決するには、組み立てる前に 3M スコッチ パッドまたは細いスチールウールを使用してください。最終的な表面仕上げを行う必要があるとします。
Notes
These parts are not mass produced and we use multiple machine shops, so surface finish, texture, and color may vary between batches. Colors may also look different depending on your screen, the lighting, and variations in anodizing.
Please be sure to review our refund policy for cancelled and returned orders.
We cannot change the value of the shipment and sadly we do not have control over your particular country's fee/tariffs/taxes.
Brass parts come as machined and may show oxidation/discolor (due to being exposed to air) and some small machining or small scratches may be present. Assume you will need to do your final surface finishing using a flexible 3M sanding pad. (The 3M 7448 usually works well). After polishing, clean and apply clearcoat, poly, or other coating to maintain the shine. Note Brass is also very dense (heavy) and conductive. Consider in some applications, these attributes may have adverse effects. (ex. The SP hinges will not support the screen as well). If used with electronics, it is advisable to use kapton tape, insulating paint, (nail polish may work) to prevent electrical shorts.
Resources
Out of stock? Signup for our out of stock notification on this product page and check our product availability page
Assembly Instructions
International Customers
We are located in the USA, and want everyone in the world to experience Boxy Pixel products worldwide! It is important to understand a few points:
1. There are two shipping methods available. DHL and USPS (United States Postal Service). DHL is very fast and comes with insurance, but can be expensive. The USPS slow shipping we offer can take many weeks, is not reliable, and is not insured.
2. If you do choose uninsured USPS for your international shipping, we do offer third party insurance to help in case it gets lost. This is "route" insurance. It is not expensive, and is worth the cost. Deselecting this option at checkout will waive all insurance. If your package is lost, we unfortunately cannot send a refund or replacement.
3. If an item gets shipped back to us due to delivery problems, we would need to charge additional fees if you would like to attempt delivery again.
4. Return shipping is the responsibility of the buyer
5. We are prohibited from shipping batteries outside of the USA.
These parts are not mass produced and we use multiple machine shops, so surface finish, texture, and color may vary between batches. Colors may also look different depending on your screen, the lighting, and variations in anodizing.
Please be sure to review our refund policy for cancelled and returned orders.
We cannot change the value of the shipment and sadly we do not have control over your particular country's fee/tariffs/taxes.
Brass parts come as machined and may show oxidation/discolor (due to being exposed to air) and some small machining or small scratches may be present. Assume you will need to do your final surface finishing using a flexible 3M sanding pad. (The 3M 7448 usually works well). After polishing, clean and apply clearcoat, poly, or other coating to maintain the shine. Note Brass is also very dense (heavy) and conductive. Consider in some applications, these attributes may have adverse effects. (ex. The SP hinges will not support the screen as well). If used with electronics, it is advisable to use kapton tape, insulating paint, (nail polish may work) to prevent electrical shorts.
Out of stock? Signup for our out of stock notification on this product page and check our product availability page
Assembly Instructions
We are located in the USA, and want everyone in the world to experience Boxy Pixel products worldwide! It is important to understand a few points:
1. There are two shipping methods available. DHL and USPS (United States Postal Service). DHL is very fast and comes with insurance, but can be expensive. The USPS slow shipping we offer can take many weeks, is not reliable, and is not insured.
2. If you do choose uninsured USPS for your international shipping, we do offer third party insurance to help in case it gets lost. This is "route" insurance. It is not expensive, and is worth the cost. Deselecting this option at checkout will waive all insurance. If your package is lost, we unfortunately cannot send a refund or replacement.
3. If an item gets shipped back to us due to delivery problems, we would need to charge additional fees if you would like to attempt delivery again.
4. Return shipping is the responsibility of the buyer
5. We are prohibited from shipping batteries outside of the USA.
Give your Classic electronics a new life!
Unique
Parts cut from a solid block of billet aluminum
Protection
Each part is anodized for long lasting protection