Please refer to our FAQ page if you have further questions.
These parts are not mass produced and we use multiple machine shops, so surface finish, texture, and color may vary between batches. Colors may also look different depending on your screen, the lighting, and variations in anodizing.
Inventory may be slightly off due to these variations and potential damage of parts-- though we adjust for it, this is difficult to predict and we may have fewer of any item than anticipated.
Please be sure to review our refund policy for cancelled and returned orders.
Please see our FAQ page for information about international orders, import fees, and tariffs. We do not change the value of the shipment.
Brass will come as it was machined and can show some oxidation/discolor. To remedy, simply use a 3M scotch pad, or a fine steel wool prior to assembly. Assume you will need to do your final surface finishing.
It is recommended that the edges of the 3 "legs" on each button are chamfered or rounded by sanding the sharp edges. This is not required but can help ensure the button actuate freely and do not ever bind.