ゲームボーイアドバンスの機械加工ボタンと方向キーパッド
CNC 加工されたゲームボーイアドバンス用の方向キーパッドとボタン。これらは、従来のプラスチックシェルとBoxy Pixelで機械加工されたゲームボーイアドバンスシェルの両方に適合します。
含まれるもの:
- 1×方向キーパッド
- 1×Aボタン
- 1×Bボタン
ショルダーボタン(L・R)は付属しておりません。
部品の在庫がない場合は、中央の場所にアクセスして部品の入手可能性を確認してください。注文中の色と、部品が届くまでの推定時間も表示されます。パーツの最新情報はこちら: https://www.boxypixel.com/pages/product-availability
すべての GBA 製品を表示するには
を参照してください。さらに質問がある場合は、 FAQ ページをご覧ください。
注記：
これらの部品は大量生産されておらず、複数の機械工場を使用しているため、表面仕上げ、質感、色がバッチごとに異なる場合があります。また、お使いの画面や照明、アルマイトの変化により色が異なって見える場合があります。
これらの変動や部品の潜在的な損傷により、在庫は若干ずれる可能性があります。調整は行っておりますが、これを予測することは難しく、どのアイテムでも予想よりも少ない場合があります。
注文のキャンセルおよび返品に関する返金ポリシーを必ずご確認ください。
海外からの注文、輸入手数料、関税に関する情報については、よくある質問ページをご覧ください。出荷金額は変更しません。
真鍮は機械加工されたままの状態で出荷されるため、多少の酸化/変色が見られる場合があります。この問題を解決するには、組み立てる前に 3M スコッチ パッドまたは細いスチールウールを使用してください。最終的な表面仕上げを行う必要があるとします。
各ボタンの 3 本の「脚」のエッジは、面取りするか、鋭いエッジを研磨して丸くすることをお勧めします。これは必須ではありませんが、ボタンが自由に作動し、拘束されないようにするのに役立ちます。
Notes
These parts are not mass produced and we use multiple machine shops, so surface finish, texture, and color may vary between batches. Colors may also look different depending on your screen, the lighting, and variations in anodizing.
Please be sure to review our refund policy for cancelled and returned orders.
We cannot change the value of the shipment and sadly we do not have control over your particular country's fee/tariffs/taxes.
Brass parts come as machined and may show oxidation/discolor (due to being exposed to air) and some small machining or small scratches may be present. Assume you will need to do your final surface finishing using a flexible 3M sanding pad. (The 3M 7448 usually works well). After polishing, clean and apply clearcoat, poly, or other coating to maintain the shine. Note Brass is also very dense (heavy) and conductive. Consider in some applications, these attributes may have adverse effects. (ex. The SP hinges will not support the screen as well). If used with electronics, it is advisable to use kapton tape, insulating paint, (nail polish may work) to prevent electrical shorts.
Resources
Out of stock? Signup for our out of stock notification on this product page and check our product availability page
Assembly Instructions
International Customers
We are located in the USA, and want everyone in the world to experience Boxy Pixel products worldwide! It is important to understand a few points:
1. There are two shipping methods available. DHL and USPS (United States Postal Service). DHL is very fast and comes with insurance, but can be expensive. The USPS slow shipping we offer can take many weeks, is not reliable, and is not insured.
2. If you do choose uninsured USPS for your international shipping, we do offer third party insurance to help in case it gets lost. This is "route" insurance. It is not expensive, and is worth the cost. Deselecting this option at checkout will waive all insurance. If your package is lost, we unfortunately cannot send a refund or replacement.
3. If an item gets shipped back to us due to delivery problems, we would need to charge additional fees if you would like to attempt delivery again.
4. Return shipping is the responsibility of the buyer
5. We are prohibited from shipping batteries outside of the USA.
These parts are not mass produced and we use multiple machine shops, so surface finish, texture, and color may vary between batches. Colors may also look different depending on your screen, the lighting, and variations in anodizing.
Please be sure to review our refund policy for cancelled and returned orders.
We cannot change the value of the shipment and sadly we do not have control over your particular country's fee/tariffs/taxes.
Brass parts come as machined and may show oxidation/discolor (due to being exposed to air) and some small machining or small scratches may be present. Assume you will need to do your final surface finishing using a flexible 3M sanding pad. (The 3M 7448 usually works well). After polishing, clean and apply clearcoat, poly, or other coating to maintain the shine. Note Brass is also very dense (heavy) and conductive. Consider in some applications, these attributes may have adverse effects. (ex. The SP hinges will not support the screen as well). If used with electronics, it is advisable to use kapton tape, insulating paint, (nail polish may work) to prevent electrical shorts.
Out of stock? Signup for our out of stock notification on this product page and check our product availability page
Assembly Instructions
We are located in the USA, and want everyone in the world to experience Boxy Pixel products worldwide! It is important to understand a few points:
1. There are two shipping methods available. DHL and USPS (United States Postal Service). DHL is very fast and comes with insurance, but can be expensive. The USPS slow shipping we offer can take many weeks, is not reliable, and is not insured.
2. If you do choose uninsured USPS for your international shipping, we do offer third party insurance to help in case it gets lost. This is "route" insurance. It is not expensive, and is worth the cost. Deselecting this option at checkout will waive all insurance. If your package is lost, we unfortunately cannot send a refund or replacement.
3. If an item gets shipped back to us due to delivery problems, we would need to charge additional fees if you would like to attempt delivery again.
4. Return shipping is the responsibility of the buyer
5. We are prohibited from shipping batteries outside of the USA.
Give your Classic electronics a new life!
Unique
Parts cut from a solid block of billet aluminum
Protection
Each part is anodized for long lasting protection