Game Boy Advance SP HINGED Metal housing set
This shell kit design was designed for stock parts, but also ready for modifications if desired. It's possible you can can drop the parts in without any soldering for a basic build. The housings also have holes cut in the sides for headphone jack and type-C charging. If you choose to keep all parts OEM, we have port blockers included to fill the unused holes.
Features
- Cutouts for optional type-C charge board and 3.5mm headphone jack
- Removable top plate
Includes
- Metal Front housing
- Metal rear housing
- Metal LCD front housing
- Metal LCD rear housing
- Metal LCD rear panel cover
- Metal Battery cover
- Plastic bumper with adhesive
- Plastic bushings (prevents metal on metal hinge movement
- Removable Metal plugs (for type-C and headphone jack holes) for those not doing these upgrades
Warnings and Considerations
- You will need a small Philips drive, and also a small hex drive (1.5mm)
- Wires and donor console parts not included
- Note: brass housings are very dense. Your hinges may have trouble supporting the extra weight if you are doing some extreme game play
Notes
These parts are not mass produced and we use multiple machine shops, so surface finish, texture, and color may vary between batches. Colors may also look different depending on your screen, the lighting, and variations in anodizing.
Please be sure to review our refund policy for cancelled and returned orders.
We cannot change the value of the shipment and sadly we do not have control over your particular country's fee/tariffs/taxes.
Brass parts come as machined and may show oxidation/discolor (due to being exposed to air) and some small machining or small scratches may be present. Assume you will need to do your final surface finishing using a flexible 3M sanding pad. (The 3M 7448 usually works well). After polishing, clean and apply clearcoat, poly, or other coating to maintain the shine. Note Brass is also very dense (heavy) and conductive. Consider in some applications, these attributes may have adverse effects. (ex. The SP hinges will not support the screen as well). If used with electronics, it is advisable to use kapton tape, insulating paint, (nail polish may work) to prevent electrical shorts.
Resources
Out of stock? Signup for our out of stock notification on this product page and check our product availability page
Assembly Instructions
International Customers
We are located in the USA, and want everyone in the world to experience Boxy Pixel products worldwide! It is important to understand a few points:
1. There are two shipping methods available. DHL and USPS (United States Postal Service). DHL is very fast and comes with insurance, but can be expensive. The USPS slow shipping we offer can take many weeks, is not reliable, and is not insured.
2. If you do choose uninsured USPS for your international shipping, we do offer third party insurance to help in case it gets lost. This is "route" insurance. It is not expensive, and is worth the cost. Deselecting this option at checkout will waive all insurance. If your package is lost, we unfortunately cannot send a refund or replacement.
3. If an item gets shipped back to us due to delivery problems, we would need to charge additional fees if you would like to attempt delivery again.
4. Return shipping is the responsibility of the buyer
5. We are prohibited from shipping batteries outside of the USA.
These parts are not mass produced and we use multiple machine shops, so surface finish, texture, and color may vary between batches. Colors may also look different depending on your screen, the lighting, and variations in anodizing.
Please be sure to review our refund policy for cancelled and returned orders.
We cannot change the value of the shipment and sadly we do not have control over your particular country's fee/tariffs/taxes.
Brass parts come as machined and may show oxidation/discolor (due to being exposed to air) and some small machining or small scratches may be present. Assume you will need to do your final surface finishing using a flexible 3M sanding pad. (The 3M 7448 usually works well). After polishing, clean and apply clearcoat, poly, or other coating to maintain the shine. Note Brass is also very dense (heavy) and conductive. Consider in some applications, these attributes may have adverse effects. (ex. The SP hinges will not support the screen as well). If used with electronics, it is advisable to use kapton tape, insulating paint, (nail polish may work) to prevent electrical shorts.
Out of stock? Signup for our out of stock notification on this product page and check our product availability page
Assembly Instructions
We are located in the USA, and want everyone in the world to experience Boxy Pixel products worldwide! It is important to understand a few points:
1. There are two shipping methods available. DHL and USPS (United States Postal Service). DHL is very fast and comes with insurance, but can be expensive. The USPS slow shipping we offer can take many weeks, is not reliable, and is not insured.
2. If you do choose uninsured USPS for your international shipping, we do offer third party insurance to help in case it gets lost. This is "route" insurance. It is not expensive, and is worth the cost. Deselecting this option at checkout will waive all insurance. If your package is lost, we unfortunately cannot send a refund or replacement.
3. If an item gets shipped back to us due to delivery problems, we would need to charge additional fees if you would like to attempt delivery again.
4. Return shipping is the responsibility of the buyer
5. We are prohibited from shipping batteries outside of the USA.
Give your Classic electronics a new life!
Unique
Parts cut from a solid block of billet aluminum
Protection
Each part is anodized for long lasting protection