Pre-Order: iPod Classic Battery 1250 mAh 5th, 6th, 7th Generation (USA only)
Tax excluded. Shipping calculated at checkout
Pre-Order Item:
This item is part of Batch #2.
Estimated shipping: August 2026.
Once parts arrive at Boxy Pixel and pass quality inspection, orders will begin shipping in the order they were received.
Overview
Our MKII MIN metal housings are designed around this thin, 1250 mAh battery.
If outside the US, you will need to find a battery that is equal to or less than 3mm x 50mm x 68mm. Try searching for a 304860 (or 304050) lithium battery. You will need to solder to your battery to our board.
Features
- 3.8 Voltage
- Plugs into our MKII custom PCB only
- Dimensions: 3x50x68mm
- Plug type: JST, ACH
- Red = +VBAT, Black = GND, White = NTC thermistor
- PCM/PCB protection for over-charge, over-discharge, and short-circuit.
Includes
- 1x Battery
Notes
These parts are not mass produced and we use multiple machine shops, so surface finish, texture, and color may vary between batches. Colors may also look different depending on your screen, the lighting, and variations in anodizing.
Please be sure to review our refund policy for cancelled and returned orders.
We cannot change the value of the shipment and sadly we do not have control over your particular country's fee/tariffs/taxes.
Brass parts come as machined and may show oxidation/discolor (due to being exposed to air) and some small machining or small scratches may be present. Assume you will need to do your final surface finishing using a flexible 3M sanding pad. (The 3M 7448 usually works well). After polishing, clean and apply clearcoat, poly, or other coating to maintain the shine. Note Brass is also very dense (heavy) and conductive. Consider in some applications, these attributes may have adverse effects. (ex. The SP hinges will not support the screen as well). If used with electronics, it is advisable to use kapton tape, insulating paint, (nail polish may work) to prevent electrical shorts.
Resources
Out of stock? Signup for our out of stock notification on this product page and check our product availability page
Assembly Instructions
International Customers
We are located in the USA, and want everyone in the world to experience Boxy Pixel products worldwide! It is important to understand a few points:
1. If an item gets shipped back to us due to delivery problems, we would need to charge additional fees if you would like to attempt delivery again.
2. Return shipping is the responsibility of the buyer
3. We are prohibited from shipping batteries outside of the USA.
These parts are not mass produced and we use multiple machine shops, so surface finish, texture, and color may vary between batches. Colors may also look different depending on your screen, the lighting, and variations in anodizing.
Please be sure to review our refund policy for cancelled and returned orders.
We cannot change the value of the shipment and sadly we do not have control over your particular country's fee/tariffs/taxes.
Brass parts come as machined and may show oxidation/discolor (due to being exposed to air) and some small machining or small scratches may be present. Assume you will need to do your final surface finishing using a flexible 3M sanding pad. (The 3M 7448 usually works well). After polishing, clean and apply clearcoat, poly, or other coating to maintain the shine. Note Brass is also very dense (heavy) and conductive. Consider in some applications, these attributes may have adverse effects. (ex. The SP hinges will not support the screen as well). If used with electronics, it is advisable to use kapton tape, insulating paint, (nail polish may work) to prevent electrical shorts.
Out of stock? Signup for our out of stock notification on this product page and check our product availability page
Assembly Instructions
We are located in the USA, and want everyone in the world to experience Boxy Pixel products worldwide! It is important to understand a few points:
1. If an item gets shipped back to us due to delivery problems, we would need to charge additional fees if you would like to attempt delivery again.
2. Return shipping is the responsibility of the buyer
3. We are prohibited from shipping batteries outside of the USA.
Give your Classic electronics a new life!
Unique
Parts cut from a solid block of billet aluminum
Protection
Each part is anodized for long lasting protection