Metal Game Boy Advance (GBA) cartridge- Machined

These machined aluminum game cart housings are designed to replace the plastic stock game carts in style. 

Cartridges have a CNC smooth machined surface, and have that shiny and smooth raw machined look.  

Includes both front and rear housings.  Perfect fit for your stock game PCB internals.  The touch points were carefully designed and machined to not touch any conductive surfaces.  The aluminum shells are clear anodized to help prevent scratches. 

This does not fit everdrive, ez flash or other flash carts.

To view all of our GBA products

Please refer to our FAQ page if you have further questions.

Disclaimer!

• Although these fit most game cart electronics, there may be some instances where they do not fit and/or you may need to slightly file the part.  A example is a game cart that has a battery solder joints at at angle.  6/25/20 - If your GBA cart electronics is "tall", it will not fit these first revision of parts.
• Please use common sense if using these metal parts in a metal Game Boy housing.  Sliding metal (cart) on metal (shell) creates more friction and can cause scratching.
• Please take care not to over-tighten the fastener, as it is very small. 

Notes:

These parts are not mass produced and  we use multiple machine shops, so surface finish, texture, and color may vary between batches. Colors may also look different depending on your screen, the lighting, and variations in anodizing.

Inventory may be slightly off due to these variations and potential damage of parts-- though we adjust for it, this is difficult to predict and we may have fewer of any item than anticipated.

Please be sure to review our refund policy for cancelled and returned orders.

Please see our FAQ page for information about international orders, import fees, and tariffs. We do not change the value of the shipment.

Brass will come as it was machined and may show some oxidation/discolor. To remedy, simply use a 3M scotch pad, or a fine steel wool prior to assembly.  Assume you will need to do your final surface finishing.